Diy Pull Out Closet Rod

But it makes sense to get the deepest tower possible.

Diy pull out closet rod. Place clothes flat on their hangers in two piles one for short items like shirts and the other for long items like coats and pants hung full length by their cuffs or waistband. Measure the height of each pile to get the desired lengths for short and long item rods. To install a closet rod all you need is a rod rod sockets screws a basic tool kit and a handsaw. Leave wiggle room between closet rods and shelves.

After one year all articles of clothing still facing outwards were not worn and you can consider getting rid of them. Keep in mind that hangers need sliding space. This would depend on the brand or manufacturer of the particular pull down. The next strap added was the one closest to the back of the closet.

Bottom line make sure you have plenty of distance to operate the pull down as well as stand directly in front of it. It s important for the rod to be supported when it s pulled out so we took half the distance of the pipe length 15 and mounted that tube strap 15 from the front strap. If you want more closet rod hanging space choose the narrower tower. We did this so that the wood wouldn t split.

If your rod s too long you ll have to measure the closet width and saw the rod down to size. Keep rods at the right height and length. If this is the case mount the closet rod below the shelf. May 12 2018 explore sassi space s board closet rod ideas on pinterest.

Once you re gone through your closet and weeded out the unused items turn all hanging clothing with the hanger facing outward. Beyond plain white wire. When a pull down closet rod is fully extended out of the cabinet it will reach a distance of about 24 30. Say a shelf built into your closet obstructs the optimal rod placement position.

Plus check out these diy closet organization ideas on a budget. Empty space in front is just wasted.